Intelliframe Mods, Configurations

[gorymonkey2]

This thread is basically for people to post any modifications and/or configurations they've made to their intelliframes that make them shoot faster, better, or different. I'm going to try to modify my intelliframe but need some ideas. This includes:

- number of shims
- ULT or not
- ouput pressure
- trigger style
- anything else related

If you could try not to post anything that involve using autococker parts and also please add whether or not the modification is toruny legal or not.

[Chronobreak]

uhm...thats not really moding the inteliframe thtas moding the valve and not so much a mod as preference on triger style..i dono but it can alos be done with y-grip or any other agd trigger so...

[Bad_Dog]

Trigger stops, both above and behind. The length of the pull (to set of the marker) is still the same, but the slack behind and infront of the trigger is removed, making it easier for me to shoot at higher speeds...

[gorymonkey2]

thanks Bad_Dog, that was exactly what i was thinking of doing but wasn't sure if it worked very well or not, if you could, please give me more detailed "instructions" such as, drill bit/tap size, which size of screw etc.

[Bad_Dog]

This should help

http://www.automags.org/forums/showthread.php?p=1428820#post1428820

[gorymonkey2]

Thankyou thankyou thankyou. by the way Do you have any idea whether this is tournament legal? also, i wasn't really sure with the drawing and explanation where it says "you don't want threads breaking through the front of the trigger" please explain.
Thanks again.

[Bad_Dog]

Its completely tournalent legal, unless you have an X or RT valve and it helps you get more bounce...

The part where I said to be carefull about the threads going through the front of the trigger, I meant watch out because if you drill the hole too far forward the hole will obviously break through thr front of the trigger...

example:

if you have a 2 inch diameter drill bit, and you drill a hole only 3/4 an inch away from the edge of a board... The drill bit will obviously break through the edge of the board...

Since there isn't alot of room on the top of the trigger, I just wanted to make sure that people didnt drill to close to the edge: thus breaking through...

[trevorjk]

i once put blinking lights in my grips and everytime i shot they blinked :)


bad dog where in wisconsin do you live?

[Bad_Dog]

I live in waukesha... I belive you were the one who sold BeaverEater those pods... right? if so, I live ablut 8 min away from where you guys met...

I often haunt paintball sams but havent been around in a little while...