Center feed Qloader question.

[slimjim32828]

im thinking about buying a ule rt custom. and i want to run a qloader. wouldnt that run better with the warp feed body? it would probly be more low profile. is there some kinda custom elbow where i could run a normal hopper on the warp feed body? (for back up and because i dont have the Q yet.) or would i just be better off getting the center feed.

[alouba]

the thing about warp feed is that its warped left only
and if you mount the qloader the hose will have to come out the right side of the feed socket, no good!
if only AGD can make right warped body or AIC can make feed socket with left side outlet....

[APowers365]

There are warp-right bodies but only like 10 were made or something...very few. Check qloader.com... They are coming out with a swivel exit hole so it will work on a warp-left body.

[Adrenaline_Junkie]

I have a Qloader with a centerfeed ULE. Its not that bad and you can use a normal loader if you ever need to (which i doubt you will). Heres the link to my thread that has a picture of my gun with a Q setup.

http://www.automags.org/forums/showthread.php?t=136838

[jwalker87]

i also have a qloader on a vert. feed body. Works fine for me; they might be able to see your tube stick out, but try to hit it!

[slimjim32828]

well i got a while to think about it, cuz i got no cash. if anybody got a used Rt custom tell me! and when you took the silver parts off is there an easy way to mount the grips strait to the body. does anyone sell replacements for the flashy silver parts on the side of the RT?