new to mag ?? about regular maintenance

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • crazedp-baller
    Registered User
    • Apr 2004
    • 22

    #1

    new to mag ?? about regular maintenance

    I just got my first mag and was wondering if there is any maintenance other than giving the reg 2-3 drops of oil where it says oil. do you oil the bolt like other guns? What about the huge o-ring behind the bolt do you need to oil that. or anything else that needs to be done regularily that i need to know about. Also the thing that the trigger pushes on gets stuck sometimes. The gut i got the gun from said it was because it needs an on/off valve. If someone can just verify this for me so im not spending money when i don't need to. Thanks for the help, mitch
  • wantamag
    Rec Poster
    • Mar 2003
    • 5055

    #2
    few drops in the vavle wil do and other than some wear parts like the 0-rings and the bumper you shouldnt need to repace anything soon take the on/off valve out and the pin out and get some oil inside that thing most the time oil wont get into it until its worn in abit more itl loosesn up alot after that

    Comment

    • virus
      AO's dirty little secret
      • Oct 2000
      • 1524

      #3
      i just used my mag at the last AONE day a couple weekends ago....

      my mag sat in the trunk of my car for about a year and a half (got my 1st motorcycle and did alot of riding)

      i took out my mag put 3 drops of oil into the air line, took of the barrel, gassed it up fired it untill there was nomore oil spray coming out, put the barrel on and packed into my gear bag to go play....

      also i never cleaned it before putting it away a 1 1/2 year ago.... (dansim can attest to that... when i met up at the hotel room and handed it to him... he was like... what this sludge all over it)

      also this still has the beta LV10 kit in it

      so very little, if any maintance is needed other then oil everyonce in a while
      Virus, King of the Basement Trollz has spoken

      Comment

      • jewie27
        Senior Member
        • May 2001
        • 1275

        #4
        Oil where it says "oil", and then put oil on every o-ring.

        Comment

        Working...