i just got a minimag and know nothing about it..its used..it was shooting fine before..but i took apart the bolt and regulator assembally..just to look at it..and when i put it back on..if i shoot the gun its really weak and low sounding, and its doing that "sprinkler" thing if i hold the trigger in...but i dont know which oring to look at...is it the very small one on the brass part...the diagrams look nothing like what i see inside the gun
-
-
actually the problem with it seeming to shoot really weak was teh velocity (lol)
but im still having that sprinkler sound if i hold the trigger in...
the gun also came with like 80 o-rings all different sizes...its seems all complicated compared to my old 98 custom...im bringing it into the shop on saturday anyway...but i was wondering if there was anything i could do here -
clean/oil/replace all the orings in the on/off assembly. the culprit is either the inner on/off oring all the way past the top, or the inside ring on the on/off bottom. maybe you just got some dirt in there. try dissasembling, cleaning, oiling and reassembling it and see how you do. if that doesnt work and you have a lot of orings, just redo the entire on/off.Comment
-
The lawn sprinkler effect is usually caused by dirt or damage to the top middle white teflon o-ring.Except for the Automag in front, its usually the man behind the equipment that counts.Comment
-
its a new bolt..the gun came with the new bolt and the old one...i changed the o-ring on the copper part u unscrew with the copper spring behind it..cause the old one looked pretty worn out and it was all dark coloured...i havnt had a chance to test it since thoComment
-
Originally posted by Orion33
What copper spring? If were still talking about the "sprinkler" problem, I would have to agree and say it's the on/off.Comment
-
The copper spring is what they used before the spacers in the level 7 guns.Comment
-
Getting a level 10 and a ULT would probably solve all of these problems, lol.
Just replace the on/off orings and clean then entire on/off assembly out.
Don't worry, mags seem complicated at first, but once you get the hang of it, you'll be fine. Personally, my having problems with my gun and havign to fix the problem taught me more about the gun and valve than anything.
The ShadowMag
Automag RT Black
Intelliframe
AGD 68/3k Flatline
Kapp Drop Zone 3
Proconnect
12v Revvy
Warp w/ 12v mod, LED, and on/off switch
Dye BoomstickComment
-
lol i dont even kno how to get to the on off valve..would u take the velocity screw out and go that way..or from the frontComment
-
is it the little thing that screws down sorta in the top of the boltComment
-
Comment
Comment