E-mag problem

[Jeff_g87]

After I dont shoot my e-mag for a few minuets I need to pull the triger twice before it will fire. The first time i pull the triger all I here is a click.

I also heve heard that the warp feed can be rigged to run off of the E-mags battery. Will the warp be able to take 18v or does it need to be stepped down? If yes to what voltage?

[Dayspring]

If you run the warp off the battery, you need it stepped down to 12v. The board won't take more than that. The motor, however, will take 18v.

[USAF-Flyboy with a Mag]

I'm assuming it happens on a fairly charged battery, so if that's the case...Try lubing the on/off assembly and on/off pin. That usually does the trick for me in my xmag.

[Jeff_g87]

thanks Ill try that