E-Mag only fires once?

[Fall_Weiss_1939]

Im having problems with my e-mag i got a new crossfire tank and everything is in working order but in both electric and manual it will only fire once and then it will just make a continuous clicking sound every time i pull the trigger. Anyone know what the problem could be?

[James]

Im having problems with my e-mag i got a new crossfire tank and everything is in working order but in both electric and manual it will only fire once and then it will just make a continuous clicking sound every time i pull the trigger. Anyone know what the problem could be?

probably the same problem i am having with my sear in my thread lol.

umm turn your velocity up?

[Fall_Weiss_1939]

Is that the only possible solution you know of?

[hitech]

Is the trigger rod resetting? If not, the on/off pin is sticking in the quad oring. Either oil it or replace (an oil) it. If not, then you probably need to turn up the velocity, or change to the next shorter spring.

[nato]

I would have first checked the battery. If my electronics start acting up that is usually the reason.

N.A.T.O.

[knuckledragger]

e-mag

If a e-mag is like a e-gripe I had the identical problem. I changed to an expensive battery and it worked perfectly. Cheap batteries don't have enought charge to make it opperate correctly. Hope this is remotely usefull.

[Smokee_2_7]

knuckledragger
I would be verry interested to learn more about how you changed the battery.

What did you use?


Fall_Weiss_1939,

Check your solenoid plunger and sear for proper alignment. Remove the c-clip on the plunger, remove the sear axle, set the selector to E, and gently remove the whole assembly. Check and make sure that your plunger is exactly in-line with the rest of the sear assembly. Sometimes it can get slightly off-center: the result is pretty much what you're describing.



Hope this helps,

Carl