ULT leak...

[ejm]

Ok bought a ule for my xvalve with hyper frame have 3 shimms in ult (centerflag told me to try 3). Heres the deal with abought 2 cases threw it it now leaks. I have now replaced all the orings on the thing and it still is leaking. any sugestions would be nice.

thanks
JM

[Dayspring]

How new is the Xvalve/level 10?

Here's what you do. Remove the hyperframe and put the stock frame back on. You need to be able to test if the ULT is leaking or its something else (level 10)

After putting the stock trigger back on, press and hold the trigger. If the leak stops, it's a level 10 thing.

If it continues to leak, it's a ULT thing.

[ejm]

everything is less new
stock frame press in and it still leaks. all orings replaced on ult

[ejm]

looking at it more it seems to almost but not quite stop when i hold down the trigger. lx seems to be fine thought

[ejm]

so if i push in the on/off and hold it there after firing it will stop the leak... dont know what should be done at this point any one know anything. balling tomorrow but if i cant gt this fixed i have to send it in... so any ideas