Foregrips

[AnArchist_1944]

iam building a custom ULE mag out of a ULE body an X Valve a LVL 10 kit and an Intelliframe or a hyperframe and as a back up mech frame iam ordering a "Y" frame what would be a good foregrip and for the batterys for the Intelliframe or the hyperframe are they in the grip like a spyder or do you have to get the battery pack at the front??

iam really confused about this.

[RTC_LoKi]

punctuation please...if im reading this right intelliframe doesnt need batteries, neither does the y-grip. the grips themselves are much better quality then spyder frames. Also the only reason you would need a battery packm or whatever you are talking about, is if your building an emag but you would also need a completely different trigger.

[jwalker87]

well for the hyperframe, yes, the battery is inside the grip. The e-mag frame is the one with the battery pack foregrip. I think that's what he's asking

[AnArchist_1944]

sorry when it comes to mags iam a total nub but what would be a good foregrip and do i need a rail yes/no.

[Dayspring]

Yes. Otherwise- the gun would fall apart. :)

[AnArchist_1944]

what do you mean the gun would fall apart i just need to know a good foregrip

[ZapTheMad]

It might be best to go to the AGD website and look at the parts breakdown for a mag.

[AnArchist_1944]

alright i went and looked at foregrips and rails in the parts section but that dident help me much can some one jus flat out tell me what a good foregrip would be for a ule body and if i need a rail or not and if so what rail i would need i have ot order this stuff soon and the deadline is fast approching.

[Darken Sun]

alright i went and looked at foregrips and rails in the parts section but that dident help me much can some one jus flat out tell me what a good foregrip would be for a ule body and if i need a rail or not and if so what rail i would need i have ot order this stuff soon and the deadline is fast approching.

Yes, you need a rail. As for a foregrip, im gonna have to say the Dye gas thru with that comfy foam stuff on it

[AnArchist_1944]

dose it have to be an automag specific foregrip or not and what rail would be best.

[craltal]

Maybe if he can't figure out that he needs a rail he shouldn't be trying to build a mag...

The intelliframe and the y-grip are both mech frames. phenominal mech frames at that.

You need a rail. you can buy an AGD rail or a rogue rail (there might be others, but these are the most widely found). the rogue, i believe, is not only milled to give a different look, but also reduces weight over the stock rail.

You need an AGD vertical bottle adapter in order to put a fore grip on it. With the adapter any standard threaded fore grip will fit.