help, hardly any air pressure when firing

[ProfessorP]

When I pull the trigger on my gun (just a classic automag with x chamber and CO2) I get almost no air coming out. Theres is a very slight sound of air coming, its like the sound of an empty tank, just a little sputter, but the tank is completely full. I dont know what the problem is, I seriously doubt that there is enough air to even get the ball out of the barrel. I know a minimal ammount about automags I'm pretty new to them, so any help would be immensley appreciated.

Also I'm looking to upgrade something on my gun at some point in time, I'm on a tight budget so I'm really only looking to upgrade one thing (i.e on/off assembly, trigger frame...). If you have any ideas let me know.

Thank You


Phil

[Chicago Pb 7]

I'm new to this also but you probably shouldn't be using co2.

[jwalker87]

yah first upgrade should be HPA. But that's probably not causing your problem. I would check all the air lines from the tank to the valve. Perhaps something has snapped off, or something else is blocking the path, only letting a small amount of co2 to the valve. That's about all I can think of.

[Raven001]

Have you tried increasing your velocity? :)

[athomas]

You didn't accidently put the on/off top in upside down by any chance?