2 questions need help with them

[bunker17]

Okay the first question im building a custom mag using one of pbx bodies but someone told me that i need a stainless still ring for the inside and i aparently don't have it? is this true were can i buy it ?

2nd question
my Xmag battery seems to turn itself off while playing even while it has charge i check for problems with the battery im thinking that it is that the contacts are mess up anyway to make them be in their place???

[athomas]

1. Check with PBX. The washer and retaining rings that AGD sells may fit.

2. Check the screw hole where you fasten the circuit board into the grip frame. Sometimes that hole gets a little too much annodize and it can affect the electrical connection. Run a tap into it or at least clean it out. Make sure your screw is tight. That connection provides ground for the operation iof the board.

[Dayspring]

How did you get a PBX body? We made 2, and as far as I know, none were ever released.

[bunker17]

it really looks the one in the forum some seller sold it to me he told me it was pbx maybe it wasn't but it looks alike. Bought it on PBnation

[Dayspring]

Please post a picture of it, or email it to me. I will let you know if it's a PBX body or not.

[athomas]

Weren't there mag bodies on ebay that looked just like the pbx bodies? Maybe its one of those.

[Dayspring]

Those were the IT Xtreme Depot bodies. They were alot more organic. they had what looked like fangs over the valve. Ours didn't have that.

[bunker17]

i don't actuallt have a camera but anyway it doesn't matter anymore i got the washer plus im going to sell it localy but thanks for help anyway