Bolt wont go in

[Polish]

I just got my xvalve.. and when I go to install it the bolt wont go in.. I have a classic body. Anyone have an idea to why this is happening?

[jesseyo13]

make sure that your on off is pushed in all the way

[Dayspring]

If need be, take a file to the inner steel ring in the body to smooth out any possible burrs on it.

[ZapTheMad]

My valve won't go in when I use the stock on/off. The orings push it out just enough that it won't fit. Here's how you fix it...

Turn the valve so the on/off points sideways, get it up close and push the on/off in with your finger. Once you get it brealy started, turn the valve the right way and push it in.

Hope this helps.

[CaliMagFan]

check the field strip bushing in the rail... it might not be the on/off at all... sounds odd... but i've seen it before and scratched my head over it before.

-kyro

[Polish]

Its not the on off or the field strip pin housing.... Ima try to file the inside.. thanks.