Alright, so I just got back from D-Day today and I decided to take my Mag, Desert Fox, and Cocker apart and clean them/oil them thoroughly. Well when I got to the RT, I removed the valve retaining screw on in the back underneath the body and valve and then proceded to give the valve a 1/4 twist and pull out except while it moves in and out a few millimeters and twists, it will NOT come out. I've tried carefully pulling with pliers, vice grips, etc. Anything that would not damage it I've tried. I'm lost. I've taken it apart many times before and never had this problem nor even heard of this problem. It's a Splashed LV10 RT (original). Any help is GREATLY appreciated.
-
could try taking the screw out that holds the trigger frame to the rail and body it could be catching somewhere on the rail.
-
Already removed trigger frame. Still stuck. ;(Comment
-
Its hanging on the on off. Push the on off pin in thru the hole on bottom of bodyComment
-
Thanks for the help guys but I FINALLY got it out. I just gave it a few "love taps" on the back of the valve and that seemed to of jarred it loose enought to pull out. Thanks.Comment
Comment