i'm looking at getting an E-mag from a friend, but the retro valve needs to be rebuilt. I currently have a automag 68 classic. will the valve from the 68 work until i can get the retro rebult? (they both have lv10 bolts)
-
-
Yes, it will work fine. Just don't shoot too fast
. Some people put classic valves on their E-mags if they can't get HPA in their area.
Rooster "But such is the mentallity of the Arab people. Which is why as long as there are Arabs, there will be a terrorist problem."
^^^ known AO racists
Contact Info
AIM: holsamoht
e-mail: [email protected]
My Feedback -
Do i need to do anything besides just swapping them (i saw on other threads, people were talking about changing an on/off valve)Comment
-
If i'm not mistaken you need to change the on/off assembly and pin to the E-mag ones.Rooster "But such is the mentallity of the Arab people. Which is why as long as there are Arabs, there will be a terrorist problem."
^^^ known AO racists
Contact Info
AIM: holsamoht
e-mail: [email protected]
My FeedbackComment
-
I'm not planning on using my mag 68 while the retro is being rebuilt - so i probably wont have to do anything to the e-mag?
and thanks for the helpComment
-
Yes, you have to use the emag on/off assembly in the AIR valve for it to work in the emag.Except for the Automag in front, its usually the man behind the equipment that counts.Comment
Comment