RTP valve, LX, ULT, no-rise body am/mm rail. Shoots great with carbon fiber single trigger frame. Does not shoot at all with Hyperframe. I can't even make it fire using the hole in front of the field strip screw. I know the Hframe works because I had it on my classic. I tried the screws tight and loose no luck. Any ideas?
-
-
had the same problem with my used hyperfame. I installed an ULT on/off and it is sorta fixed -
Yeah, I was having probs with the RT on/off so I got a ULT to try to get it to work better. Didn't work.Comment
-
Iv'e had that problem with my hypermag for years now and i'm giving up on it. If a gun wasnt made to be an electro, it shouldnt..Sig over 50k
Comment
-
seems like I've read 4 or 5 different people posting that they've had problems with thier hyperframes.
makes me think I should start making more of these:
http://home.kc.rr.com/theelectrician...-magon-off.jpg
~E~Comment
-
I was hoping to use the Hyperframe on my RT. Alas I am tired of messing with it and I don't want to put it back on my Classic so......
If you're interested look in the ClassifiedsComment
-
you probably need either shorter or a longer on/off pin - add or subtact X number of shims from the ULT assembly - this is the equivalent of getting a shorter on/off pinProud Member Of The AO Cesspool Since 08-24-2002Comment
-
Add more shims to your ULT on/off. Don't give up on the Hyperframe. It should work with the ULT. If you run out of shims start adding shims from your level 10 kit.DComment
-
I thought that the bes way to get the Hyperframe up and running is to set up the LX and ULT with a manual trigger then put the Hyperframe on. I gotta tell ya I have 3 shims in the ULT and it fires great with the old single trigger frame the 4th shim makes it leak. I'll try adding a shim or 2 and see if that helps I hope so as I do like the Hyperframe on my Classic.
I'll let you knowComment
Comment