E-mag troubles
When I was practicing walking the trigger, the gun stopped firing. The only way I could get it to operate again was to put in manual and pull the trigger a few times, then I could get it to operate on e mode . Any idea what is going on ? 
-
-
When was the last time you charged it. Maybe the batt is low........ -
I charged it earlier that day, but my light on my charger turns green with in 5 minutes of plugging it in. I bought the gun used, so maybe the battery is going bad. What do you think?Comment
-
First off the charger light lies. It needs about 6 hrs max to charge.
Have you messed with the trigger at all since you got it? Has it ever done this before?Comment
-
Yeah, I re-adjusted the pull and the magnet on the trigger .I still need to loctite the screw for the pull because it ocassionally starts getting to tight and then the magnet cant trip the 'noid . I will try charging the battery for a few hours and see if that helps. thanks
Hey , can you tell me how and/or where to get my board upgraded to v3.2
L8r ,got to sleep for awhile before I go to work.Comment
-
The magnet on the trigger may be too close to the sensor. Back it off a bit.
You can get the software upgraded by AGD. It's just $20 for shipping it back to you. You need to call them for a RA# before you send it in.Last edited by Halliday; 06-25-2004, 10:56 PM.Comment
Comment