Trigger Pull??

[Little_Ho]

Hi

I have a little question again.... I got a Automag Classic with PF Hopper left.
It has the classic valve and still a Level7 Bolt. If i pull the Trigger all the way back and hold it. I recordnice that air is coming out of the Barrel. Iam just wondering is this normal??? or what can i do against this prob??

Little_Ho

[CNC9D]

Oil the power tube O-ring and/or replace it. Also check the on/off pin O-rings and do the same.

[athomas]

If you pull and hold the trigger in a level 7 mag and it still leaks out the barrel, then the problem is most often the top white on/off o-ring.

[AGDlover]

If you pull and hold the trigger in a level 7 mag and it still leaks out the barrel, then the problem is most often the top white on/off o-ring.

no thats if you hold it down and it starts spurting air known as the lawn springkler i've had it happen before. ok you problem just replace the Power Tube Oring under the PT spacer

[athomas]

The level 7 will not continue to leak, even without the powertube o-ring missing, if you hold the trigger. The only way air gets into the front chamber when the trigger is held, is if the o-ring in the on/off is leaking.