emag problems!!!!!

[crackrocksteady]

just got my emag in the mail today. i was soo happy. picked it up and i decided to see how the thing looks turned on. so i put the battery on and nothing happend. so i charged the battery till i got a green light. put it on my emag. i got a really quick flash of agd 1.35 then nothing. took the battery off.then put it back. nothing. then i wonder is it something inside. i completely take it apart and put it back to gether(i couldnt get the trigger out though need to know how to do that). nothing. could it be my battery maybe my board. i didnt think it needed to have gas so could that be it? any help is appreciated. thanx FOR THE HELP

[Fanatic]

back the magnet in the trigger away from the hal sensor...
if it turns back on...slowly adjust the magnet inward until it fires(or solenoid clicks-without air)
check wiring
check battery connection and post
check ground screw

dont need to take the trigger out unless you are replacing it

[crackrocksteady]

i checked the magnet its as far out as she goes. checked teh wiring didnt look like anything was wrong. check the ground screw how do i do that? and how do i check the battery and posts? i tryed chargeing the battery again to. i dont know what to do. should i call in the big guns and send it in for repairs?

[Tunaman]

send it to me ...I'll fix it. Email me.

[crackrocksteady]

ok got notice from this forum because i want to fix this my self and not have to send it to anyone that some chargers going bad can be the problem. so i opened up my charger (its sitting right here) and it smells like burnt something inside. but the board doesnt look fryed. does this mean i borke it? the light still works though. should i buy a new charger? and possibly a new battery?

[crackrocksteady]

ok. heard you could hook a 9 volt up to a emag just to see if it worked. well i did and sure enough the emag display lights up with a very pretty agd 1.37. its been the battery charger the whole time so i guess first thing tomorrow ill have my mom spend her money to get me a new one. so i should be ripping soon. then all i have to do is get it flashed to 3.2 and from there smooth rollin. already lovin my emag. but not a fan of are1257 on pbnation for sending me a emag that needs a new 80 dollar battery charger. thanx for the help guys. now i just gotta try to find the charger for less than 80. some where that isnt white wolf so i can have it in like a week at the max. once again thanx for the help guys.

[CNC9D]

picked it up and i decided to see how the thing looks turned on. so i put the battery on and nothing happend. so i charged the battery till i got a green light. put it on my emag. i got a really quick flash of agd 1.35 then nothing.

If you are Just turning the marker on to see the pretty lights, they don't stay on. Only one light flashes on the second set of lights on the left of the display. The "agd 1.35" stays on for about 6seconds.

Always make sure that the o-ring is in the battery housing, under the battery, and that the field strip screw, holding the battery housing onto the rail, is tight.

[crackrocksteady]

ok after numerus checks and making sure connections are good i have come to a conclusion that it has to be something with my battery. i charged my battery on the old charger and it acctually charged. iknow this because i put the battery pack on my emag and to my surprise i got a flash of agd 1.37 and the i got a bunch of mumbo jumbo. any one know whats wrong. do i need to charge my battery longer? or is my battery finally kicking the bucket?