hey guys im having a little trouble with the magnet in top of my emags trigger it keeps getting loose and coming out just a little bit which is making the trigger "stick" so to speak because it doesnt have return force? whats a good way to keep it in without taking the whole frame apart to remove the magnet so i can glue it in? (because i cant get it out of there without removing the trigger and i dont wanna do that)
-
-
That was happening to me on my fireblade trigger. The best thing to do it take the trigger off and put a drop of water-density super glue in the base of the hole. I used Instant Jet (blue bottle) that I use for model building. It hasn't budged since. -
uggg theres gotta be a better way lol, i forget how to remove the trigger anyway, and im afraid of scratching my gun up alot lolComment
-
Originally posted by FutureMagOwner
It will be tight, but try to dab a little glue on the magnet. Then use a pair of needle-nose pliers to put it back in place. There's probably a 95% chance you'll wipe the glue off the magnet while installing it, but that's one idea if you want to avoid taking off the trigger.
FEEDBACK
PBNation.com
Automags.org
PBReview.comComment
-
I actually i used an Epoxy to hold mine in. It does a bit better than the super glue and is not as sticky putting in.Comment
-
well i put some elmers glue on top and it seems to have worked lol, i broke about 5 other things in the process of trying to take out the trigger but if the gun works tomorrow ill be happy lol i think ill bring my sl68 just in caseComment
Comment