ULT problem. Nothing Happening!

[stevewagner89]

I recently bought the ULT and i got everything ready to go with one shim in, gassed it up, and the trigger didnt reset(didnt let me shoot it) so i tried it with 2 shims, same thing. Tried 3, got one shot of and it didnt reset. Tried 4 shims and nothing happend. So i finally tried 5 shims...still nothing. I am using a classic valve but i thought the only problems with it would be shootdown, not having it not work at all. Please help. Any help would be greatly appriciated.

[Chronobreak]

with ult classic its hit or miss some peolple cant get them to work right but whats your setup? gas? etc

[BeaverEater]

shims

I have a ULT in my classic with only 4 shims but i've heard that some valves need up to 10 or more. Try using level 10 shims its the same thing but twice the thickness. Good luck, I know it can be frusturating sometimes.

scott

[Chronobreak]

oh eyah oil it up real good if u can get some oil inside it if u can

[Bad_Dog]

The ULT takes a few extra shims to work properly in the Classic,

Heres all the info you'll need:

http://www.automags.org/forums/showthread.php?t=110976

PS, Mine has 13 shims in it :

[crackerjack]

I installed the ULT in my classic valve with all supplied shims and it didn't work either. So then I installed the LX Bolt and it worked fine.