Is 900psi input enough to get a good ROF out of an E-Mag? 20 ish?
-
Live in Nebraska, Iowa, Missouri, Kansas, South Dekota, or the surronding area?
Check out
AO Midwest Day -
Well i guess it depends on your trigger set-up and your speed on the trigger. I believe the board is capped at 20 so you wont go higher than that.RT Pro
ULE Body
I-Frame
Dye BoomyWarp
12 volt revvy
and last but not least a DROP FORWARD
Cause i like it!
Part Eskimo.....no really..... :wow: :eek:
Come play with me http://www.headrush.com/ -
I know the board is capped at 20. But with my 750psi tank, I can hardly get the thing to fire above 12 BPS. I need to know is 900 psi is enough to get the gun to BE ABLE to fire 20 bps.Live in Nebraska, Iowa, Missouri, Kansas, South Dekota, or the surronding area?
Check out
AO Midwest DayComment
-
if u can pull it that fast
Comment
-
Heh, we are having fun with the, magnets and bouncing
Live in Nebraska, Iowa, Missouri, Kansas, South Dekota, or the surronding area?
Check out
AO Midwest DayComment
-
It is more than enough...
the more input pressure you put in the more reactive the vavle will be. 850-900 should be sufficient for the marker to run. The last tank thru it was a PMI pure energy that was setup to near 900.
BKComment
Comment