I have a flatline on a 68/3000 tank and was thinking of putting the reg on a 68/4500 tank. Will it handle that pressuse? Is there a way to find out what it can handle?
Thanks!
Thanks!
-
-
If it's the black Flatline reg, it'll handle 3000. If it's the blue one, it's the 4500 one.
There is no way to convert a 3000 reg to 4500. It's stuck at 3000. -
Thank you! I'm glad I asked! That could have been ugly!Comment
-
Nah. The burst disk would've blown had you put 4500psi into the tank.Comment
-
Either way, I appreciate your help!Comment
-
Originally posted by Dayspring
maybe it would and mayvbe it wouldn't it wouldn't have. the burst disk is 5K on a 3K system. it will allow it to be filled to 4.5K easy. but the reg would mostly likely not work, freeze up or just blow air out the vent in the adjustment nut. either way, not a good plan.
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pagesComment
-
According to the last hydro on my flatline, the bottle can take 5000 psi. Hehe, not gonna try that tho.....
The ShadowMag
Automag RT Black
Intelliframe
AGD 68/3k Flatline
Kapp Drop Zone 3
Proconnect
12v Revvy
Warp w/ 12v mod, LED, and on/off switch
Dye BoomstickComment
-
It would handle the pressure, but for only a short time, but if you do try it, video tape it and e-mail it to me lol.
my email and AIM name are the same as this, Hit me up sometime
Kaiser Bob "If Debbie can do Dallas, then GI Joe can do paintball."
sweet new siteComment
Comment