I'm off to Paintball Camp in a few days but I still have a few issues to work out with my mag. I played a week or so ago and my mag immediatly started to act up. It started chuffing w/ the medium spring in so I replaced it w/ the small spring. But for some unknown reason it continued to chuff every once and awhile. This was shooting around 270-280 fps, smallest spring, and a well lubed gun. I was running the .688 back(smallest one i have and my lvl ten bolt not getting stuck in it) and the paint rolled thorugh it. Problem #2- I'm having the same occurences w/ my x as I had w/ my classic. The velocity adjuster is, or so i think, backing out on me. I easily fixed it on my classic w/ a lock but how am i going to keep it from backing out while still being able to adjust the velocity? I'm pretty sure it's backing out because gooing ont he field i'm shooting 270 or so and 700 or so shots later the gun is chuffing and shooting 240. All help is appreciated!!
Oh ya setup: x-valve, ule, 68cu 4500psi x-stream(850 output)
Oh ya setup: x-valve, ule, 68cu 4500psi x-stream(850 output)