hey whats up guys. Im currently running a minimag right now with a 12v x boarded hopper and 68ci 3000 ACI bulldog tank(not sure if its the I or II). It is a white tank with a "phat" gauge on it (smaller and newer looking with chrome regulator compared to the older aci tanks with the big gauge and red regulator). I plan on upgrading to an x-valve and ULT trigger pull kit and i was wondering if my tank with a preset output of 800-850 psi is able to handle the xvalve and ULT. I remember reading somewhere where the xvalve needed a certain amount of psi going through it. Any help or tips would be appreciated.!!! thank you
-
-
ttt -
I ran a 68/4.5k ACI Bulldog II with my X valve.
I've out-run my revvy many times, and I've kept up with an Egg. I've noticed no drop-off, etc...
The X-valve actually runs best with between 750 and 900 psi input. The higher the input, the more reactive the trigger will be.
Team Sandbaggers.
-We own j00 all.-Comment
-
have used an 68/4500 and a 92/4500 bulldog on my xvalve no issues with either one just remember u need a HP tank w/xvalve. I have heard a lot of good things about the evil scion tank system never personally used one but from what I hear it is copy of the agd flatline system, something to think about.3.2 e mag ULE body and rail. Oh yeah I gots the X inside!!!Comment
-
Originally posted by desslock
by any chance how can you tell the ACI bulldog 2 from the ACI bulldog 1? mine has a chrome regulator and a "phat" gauge on it. Its a 68ci 3000 tank with white fiber wrapping. Does anyone know the output pressure on my tank. I have bad eyes and cant read the number.Comment
-
The chrome reg with phat gauge means you have a bulldog III. I am replacing my reg seeing that it only pumps out 700psi and drops to 600psi when I pull the trigger (and es it stays at 600) Needless to say, I have problems.sigpicComment
-
thanks do you know the output pressure is?Comment
-
They say 800 preset. Run it through an inline gauge and see what you really get.sigpicComment
Comment