intelliframe trigger pull

[CSFX8588]

it says that an intelliframe has a shorter trigger pull than a stock mag. jus about how short are we talkin? in relative terms, i dont need an exact measurement

[veteranmag]

I would estimate that the trigger pull on an intelliframe is between 1/4 and 1/2 inches. I'm not sure if that is ACTUALLY shorter than a stock frame, but it feels so much shorter and lighter than with a single finger trigger.

Even without the ULT mod, using the intelliframe with a RT (X) valve, it is a snap to get high rates of fire.

[Tim Taylor]

Pull is less than 1/4" but more than 1/8". If you install trigger stops it's about 1/8".

[AGDlover]

I'm not sure if that is ACTUALLY shorter than a stock frame, but it feels so much shorter and lighter than with a single finger trigger.

it feels lighter because you have more leverage than on a stock single finger

[JRingold]

New Intelliframe

I just got a new intelliframe, do I need to adjust the seer length to compensate for the trigger pull differences? I have pressure on the trigger, yet the bolt will not release and the marker will not fire.