Hey i just recently got my RT ULE custom, and i just have some questions about it. I gased it up and started to shoot it, and i went through about 500 psi on my tank and all of a sudden it made the funky lvl 10 sound. this seemed strange considering i was dry firing and the breech was empty. after it made the sound the trigger stoped working, there was like no action. did i short stroke it or somthing? thats the only thing i thought i could have done. do i have to re gas the marker everytime this happens? i figure i just need to get use to the pull. bY the way i got the ULT installed on the gun and im using the single trig untill i have enough for a intelliframe.
-
-
What psi was your tank at when it started doing this? My guess is you got bolt stick from shortstroking. When that happens you pretty much have to push the bolt back into place with a squeegee or something. You could always look into better tuning your lvl10 if it becomes a big problem.
-
my tank was at around 2400 psi so i dont think that was the problem.Comment
-
Ok, i'm pretty sure it was bolt stick then. Hmm, maybe changing carriers on the lvl10 will help?Comment
-
What LX spring do you have installed?
Mine did something like this and it turns out I had the cut spring installed backwards, it was so long ago that I do not remember what way is the correct way to install it.
If you do have the cut spring in there, try reversing it.Comment
Comment