hyperframe, leak down barrel plz help!!

[irs709]

okay, i just got this gun, and it was working perrrfect, so it has to be something i did, i just took it all apart, then gassed it up, and it has a huge leak. i tried cocking the gun, and it wont recock. i have barely and air, not enough to shoot, but enought to push the sear. i tried turing the velocity also, that didnt do it. i dont think its the carriers or the o-rings cause it was working perfesct and i didnt change any thing... here are the specs
ule body, hyperframe, lvl X, ult. thats all that should be important
please list all the things it could be and how i could fix them. thanks
-ivan

[Mr.Goodbar989]

hmmmm I had a major leak one time but thats because my field strip screw wasnt all teh way in....im thinking what it could be lol im still a little new to mags :)

[GA Devil]

okay, i just got this gun, and it was working perrrfect, so it has to be something i did, i just took it all apart, then gassed it up, and it has a huge leak. i tried cocking the gun, and it wont recock. i have barely and air, not enough to shoot, but enought to push the sear. i tried turing the velocity also, that didnt do it. i dont think its the carriers or the o-rings cause it was working perfesct and i didnt change any thing... here are the specs
ule body, hyperframe, lvl X, ult. thats all that should be important
please list all the things it could be and how i could fix them. thanks
-ivan

If IM reading that right you said you dont have enough air to cycle the gun. Thats a big part of the problem. Get air and see if it will cycle. What valve and on/off? Sounds like your lvl 10 broke in and now needs to be retuned. Also be sure your body is screwed on al the way and nothing is making the body sit uneven. Your bolt can get jammed in the body if not flat. Also do you still have the oring on the detent? If not the detent will go in too far can jam the bolt.