Alright, I was using my ULE RT today, and I noticed that when I shortstroked every once in awhile, it would take the bolt quite awhile to reset, then it would just randomly reset. I also noticed during chrono if the trigger wasn't fully returned after firing when it was just held back i'd hear a leak from the bolt. Any idea what's causing this?
-
-
add a shim to the lvl10 if that don't work go up a carrier sizeEuro E-mag | TL63 | XMOD| EM01610
Euro Rt | OG | RT02382. -
Have you lubed up the lvl 10 carrier sufficeintly...could be that you just need to lube it up a bit. If your wondering what type of oil to use, use KC trouble free. You can get it off of e-bay for real cheap. Stay away from the autolube, over time it can gum up.Comment
-
Yea, I lubed the heck out of the ULT, dropped about 4 drops of oil down the power tube and lubed the bolt stem, it doesn't seem to do it now unless i'm real low on air. Another thing, I just got Tunaman to tune this so the medium spring would work, and a few days after I got it back, it started to act finicky, so I switched to the small spring, but now it is more prone to chopping. How do I get it to work with the medium spring again? I didn't screw with the carriers or anything since I got it back.
I'm using Gold Cup by the way.Comment
-
Well I would try going up one carrier to see if you can get rid of that bolt stick.Comment
Comment