Venting Problem
When my mag is sitting there it has a slight leak...but When i put the safety on and pull the trigger it stops...what could this be...When i smack the back of the valve it stops...It isnt a horrible leak....but its anoying...
-
-
I think 1 of 3 things could help your problem.
1. Oil the Reg Piston o-ring
2. Replace the Reg Piston o-ring
3. Replace the Reg Piston.
-
WAT the heck is a reg piston????Srry...this is my first mag....Comment
-
Reg Piston is what determines the pressure inside the valve I believe. First off, classic valve or retro valve?Comment
-
X Valve...how do i get to the reg pistonComment
-
if it stops when you put slight pressure on the trigger (like when the safty is on) then you have the LX carrier oring spaced wrong. take out all the shims in the LX and see if it goes away.
I highly doubt it has anything to do with the regpiston.
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pagesComment
-
everybody else thinks its the lvl 10...but I just wanted some more opinions....THX everybodyComment
Comment