New mag owner

[spyderpaintball]

Well im tradeing my b2k for a mag and i was wondering when i get it thursday what should i do? i know gas it up and all that. but orings to oil and that kinda stuff. also i know this is a fairly nice upgraded mag. and the previous owner is a memeber here(not sure on the screenname). but hers the stats and i can get a cheap CF hyperframe

Blue Vertical ULE Body (Scratches on feedneck)
Emag Valve (Able to accept ULT upgrade)
Level 10 installed and tuned
AM/MM Rail - Ding on the back under the valve, small scratches
Carbon Fiber Single Trigger Frame and Rubber Grips
Bicycle grip gas thru with ACP VA
12" CP .689

anyhting left to add in after the hyperframe and the ULT?

[�?�� �m���]

Welcome, Welcome! vey nice set up you have there

just oil your gun thru the asa 5-8 drops should do it
Don't use CO2 and check the sticky at the top of the forum on the ult and you should be able to get it up and working fine

[spyderpaintball]

itll be a while before i get the hyperframe or the ult but thanks. so other than the oil nothing and how often should i do that before everytime i play with it or once a week or what?

[�?�� �m���]

the level 10 and orings demand oil, youll find a substantial difference if you don't oil (leaks chuffing and bad stuff)

Oil your on/off assembly in your valve cause sometimes dropping oil in the asa dosen't lube that up enough

Oil before everyday you play would be the best bet, i usually do it before i play and open my gun up half way thru the day just in case

its a very simple task but enough to keep your gun tip top