ok so i recently got a ult and when i use it i can shoot it but every once and a while it doesnt reset and ill wait a while and i can shoot again.
-
If God was a fly would you kill it. -
That's because the ULT wasn't designed to work with a classic valve. (Which you probably have.)
Oiling the ULT assembly can help until it breaks in. Adding a shim or two won't hurt, but keep in mind that this problem is why an Xvalve/RT based valve is needed. -
so is this what they call it when the bolt sticks.If God was a fly would you kill it.Comment
-
Not really...
Bolt stick is usually when the bolt gets stuck forward. Your problem is the ULT.Comment
-
One last question after i break it in will it give me any more problems.If God was a fly would you kill it.Comment
-
It gives problems regardless of break in because of how the classic valve works. It only supplies 450psi to the top of that pin. That force is drastically reduced b/c of the ULT. In an RT based valve, the pin gets 800+psi on the pin head. As you can see, ALOT more pressure.Comment
Comment