I need help with my automag
Im currently using a automag with a xvalve, ule trigger and am experiencing problems from when i received it. I oiled the on/off assembly, placed the valve back in, lined the line up. And screwed it back in tightly. I add my dye nitro 71 4500 tank, and it does one of several things. A. the trigger will pull as if the nitro wasnt in. B. It will shoot repeatively without trigger pull(Air will shoot out) very weakly. C. it will contiuously leak out the barrel. D. It will work properly with the occasional weak air and after 3 shortings it will die out for 30 seconds then will function properly. Any suggestions?
-
-
Try taking a 3/16th allen key and turning the back of the valve. It may be that you have too low pressure coming in from the tank.Rooster "But such is the mentallity of the Arab people. Which is why as long as there are Arabs, there will be a terrorist problem."
^^^ known AO racists
Contact Info
AIM: holsamoht
e-mail: [email protected]
My Feedback -
This also might be a ULT on/off problem. Did you try and tune the ULT when you got it? Try the velocity adjust thing first though.Comment
-
Alright, what ive done is, A. took the on/off assembly out and oiled it to hell. B. took the level 10 upgrade kit apart and tuned it. Which direction should i go ? And will this help any?
Tune the on/off assembly did you m ean the l10 ? or what
LoL it stopped leaking, because im outta nitro...LoL i gotta fill it up 2morrow
Comment
Comment