Ule Trigger Bounce???

[blingbling2]

i have a Automag RT ULE with, Ule trigger, Ule body, lvl 10, intell frame, and a X valve.

how do i get this thing to bounce for rapid fire??? thanks

[TDonovan]

What kind of tank do you have?

[blingbling2]

i have a 3000 x68 i think... and its an ACI Bulldog

[ZapTheMad]

You need an adjustable tank. Some regs work better for bounce than others. I have an Armageddon and I can get my ULT to bounce about 850-900 PSI while others can't get ULT to bounce at all. Many people use the stock on/off instead of ULT to get better bounce.

[Carbon Blue]

i thought the ULT was a whole replacement for the on/off?? Do you mean they keep the on/off pin and use the ULT orings, etc.?

[MindJob]

i have a Automag RT ULE with, Ule trigger, Ule body, lvl 10, intell frame, and a X valve.

how do i get this thing to bounce for rapid fire??? thanks

I dont think the ULT bounces. I think the point was to make the pull as light as possible so you can rapid fire on your own.

[TDonovan]

I don't have my mag yet so I'm still not 100% familiar with the internals. But basically the stock on/off is the gun without ANY of the ULT parts which replace them.

The trigger pull will be heavier, but you should get more reactivity this way.

[vf-xx]

I dont think the ULT bounces. I think the point was to make the pull as light as possible so you can rapid fire on your own.

This gets debated time and time again. ULT can bounce under the right condidtions. Search for Z-man's stuff. He's got by far the best documentation of reactive mags.

[AGDlover]

just get some more preasure in your gun. i got some crazy bounce when i ran my ULT in my classic and i ran 90-1200

[Carbon Blue]

i currently run an ACI bulldog 3 with a preset 800 or 850 psi output. So do you think your ROF is faster with the increased pressure on the stock trigger assembly or faster with the lighter but less reactive ULT with a preset tank (of course with the use of the x valve)? sorry if that sounds confusing.

[REDRT]

I shimmed my brothers ULT with 5 shims (6 would full auto) Each valve remember is different. This set up worked for us. His imput is set at 1000psi and he gets mad bounce. Not hard like my classic Rt, but easier to go faster (BPS).

[warbeak2099]

I'm running 800-850 out of my Nitro Duck 68/3k preset and I get nothing. I'm looking to get a Nitro Duck X-Stream. Anyone know if they work well? They are suppose to adjust up to 900psi. I'm thinking of getting that tank and a stock .750 on/off for my x-valve so I can get bounce if I want.

[Carbon Blue]

I'm running 800-850 out of my Nitro Duck 68/3k preset and I get nothing. I'm looking to get a Nitro Duck X-Stream. Anyone know if they work well? They are suppose to adjust up to 900psi. I'm thinking of getting that tank and a stock .750 on/off for my x-valve so I can get bounce if I want.

supposedly the X-steam is supposed to be a great tank, fast recharge,screw in ability, and lightweight.

[Carbon Blue]

so can you bounce faster with the stock trigger pull and x-valve or shoot faster without the bounce with the ult and xvalve on a preset tank?

[nate2k191]

can i get more psi eventhough i have a preset tank? or do i need to buyy a whole new tank?>