Problems with my warp

[bunker17]

okay im having 2 problems with my warp
1-it doesn't feed has it supose to it gives me a little burst of paintballs then like stops till i hit so the sensor gets the vibration.

2- the line keeps disconecting from the black piece and i realy don't wanna use tape because it doesn't look that nice.

maybe it helps the warp is new has only been used once so please help.

[crackerjack]

Try adjusting the sensor under the cover plate. Turn on the warp then adjust the blue knob, it has an arrow on it. Turn it clockwise (I think) untill the warp starts spinning then back off untill it stops.

[bunker17]

how about the line how do i do so it doesn't disconect

[crackerjack]

I don't know what line you are talking about. If you mean the hose from the warp to the marker that the paintballs go through. Then you need to buy some new hose from www.proteamdirect.com/proteam/bprofwarhos.html. You just stick the hose in the plastic adapter on the warp and other end in the AGD plastic adapter for power feed or plastic tee. This new hose is like rubber with a metal wire in it so it will stay in place. With the old plastic hose you have to put two orings on both ends for it to stay in place. I use the new hose and a proteam metal tee and the hose fits over the tee and does not come off. If this doesn't help try to explain your problem a different way.

[bunker17]

you know the black plastic adapter that hooks up the transparent one well that piece keeps sliding off the place where it should be so if anyone has had a similar problem please help

[bunker17]

i still need help so please some one the proble i got is that the black plastic piece disconects from the transparent elbow so it makes my paintball fall.

[crackerjack]

Did you try not using the black adapter and push the hose on to the clear adapter?

[bunker17]

not really is it supose to go that way??

[crackerjack]

I thought that wouldn't work. So put a thin peice of electrical tape on the clear adapter and push the black adapter on make sure it fits tight. The hose should have an oring on the end to keep the hose in the adapter. The only other thing you can do is mod you hopper and run the hose through it. That will help keep the hose in place and protect the hose from getting hit. If you are useing the black hose and it gets hit the balls will break. That is mainly why I use the proteam hose, if it gets hit the balls don't break.