Hey guys, I took my RT ule custom out to the feild today for the first time. I completely fell in love with it. It provided the best performance then any other gun i have shot. the lvl 10 worked great, i only had one chop. My friends could not keep their eyes off it and everytime i set it down they begged to shoot it. However i do have a couple questions. I have been lubing it through the ASA before i shoot or play with it, and i wonder is their any way to make sure the lube has been getting to the insides of the valve and bolt ect. When i put the lube in the asa i find that it is hard to get it into the actual hole in the end of it. Aslo, because i broke once, i decided to strip it and clean it off. I did so, wiped it spotless. Is there anything else i should do? Is there really any reason to take the valve apart?
-
-
Lube in the ASA is fine for the most part, you also want to take out your on/off assembly and lube the pin in there, put a drop of lube on the bolt and smear it around the side of the bolt and you should be good to go.
For the most part, you really shouldn't need to unscrew your valve unless a seal goes bad, if you ever need to take it apart, it's pretty simple.
Comment