Thinking about morlocking my micro emag. Any tips?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • _KFC_Chicken_
    WashingtonStatePaintball. c
    • Feb 2004
    • 616
    #1

    Thinking about morlocking my micro emag. Any tips?

    Ok, anyone who has done it, will you please tell me what to expect?

    Is it hard setting it up? what about the sensor thing vs micro switch?

    With the ball detent in the middle it might be hard to ACE?

    I can solder good enough to do the wiring, and the other option I got is to wire in an Edwin ACE chip I got.



    $120 on morlock+ACE and use 9 volts, or $90 on battery charger and $20+ on 4.0.
    http://www.washingtonstatepaintball.com/
    [b][SIZE=7]Feedback Thread 1

    Feedback Thread 2
    Tags: None
    • warbeak2099
      That is my foot!
      • Jan 2004
      • 4447
      #2
      If you use breakbeam eyes it won't be hard to ace. Breakbeams are placed towards the bottom of the breech. They'd probably be right under the detent on a micro.
      My Feedback

        Comment

        • chirogator
          Registered User
          • Apr 2004
          • 42
          #3
          morlock

          pm blackvcg, he may know something about them.
          I woudn't be caught dead with a necrophiliac!
          Gravity- It's not just a good idea, it's the LAW!           :bounce:


          ULE Karta E-mag, X-valve, Morlock Board, Freak kit

          Angel Speed 05, Freak Kit, Nitro Duck X-Stream Tank

            Comment

            • TheMagMan
              AO Member 4 Life
              • Jan 2002
              • 353
              #4
              Had 1 .. been there and they are the most sensitive of guns to pop one of those boards in. If you have no experience with micro's and the specs, get a ton of help or have someone else do it for you. Every recoil shot on my micro e caused it to shoot again and again before I finally fixed it. I mainly used the mech part of the gun. Oh and I had to replace the solinoid (sp) due to a burn out. TheAngelGuy.com had some for sale a while back for $89. PM BlackVCG for any tech info if you need it.

              Good Luck







                Comment

                • _KFC_Chicken_
                  WashingtonStatePaintball. c
                  • Feb 2004
                  • 616
                  #5
                  Haha, maybe I should just pay $85 for the charger.

                  Is there any 9volt adapter for the emag? I want to at least test the gun!
                  http://www.washingtonstatepaintball.com/
                  [b][SIZE=7]Feedback Thread 1

                  Feedback Thread 2

                    Comment

                    • TheMagMan
                      AO Member 4 Life
                      • Jan 2002
                      • 353
                      #6
                      Originally posted by _KFC_Chicken_
                      Haha, maybe I should just pay $85 for the charger.

                      Is there any 9volt adapter for the emag? I want to at least test the gun!
                      Even if you rigged something up I don't think it will provide enough constant flow.
                      I may be wrong, people have a nice way of being creative on these boards.

                        Comment

                        Previous template Next
                        Working...