Operating Pressure-Tac ONe

[Porky Mag]

hey i was just wondering the Minumum and maximum operating pressure for a Tac One. And could I install a HP inline if i had the right style?

[Porky Mag]

OK can now one answer the question i thought it was pretty straight forward

[Load SM5]

Minimum is about 650. Max is pretty high but I'd stick with 950. Most HP presets work fine and I would'nt put an inline on it.

[Enemy]

ok minimum is around 750 any thing less starves the valve maximum is as high as any tank will go the valve can handle up to 3k not saying that was ever a good idea but it will handle it! now it is never recomended to put an inline on a mag the valves are regs and they are some of the fastest regs out there anything added on is redundent and again starves the system...any more questions??

[Kevmaster]

yeh, i woulnd't run it on less than 700. 600 might be doable, but you'll get some shootdown. max...eh..as high as your tank will output to be perfectly honest. for optimal conditions...somewhere around 1000

[matt-o]

mags operate at about 470 psi with LX, that is after the internal regulation, not the input pressure