Ok, I am a newbie to the forums and to my RT PRO with ULE Body and ULT. What I need to know is two things. My valve does not always seem to cycle. It will shoot great and then it locks up. The trigger gets stuck back and I have to shake the marker or hit the valve to get the valve to reset. I think this may be caused when my pressure gets too low in my bottle. I am using compressed air. My second thing is about the ULT. I need a post or article or something that helps me adjust this. I don't know much about this marker YET, and I am not happy with the lightness of the trigger or the bounce. It seems to tight to get a fast bps. Right now I am only getting 8 bps and I am sure the marker is capable of a lot faster. Any help would greatly be appreciated.
-
-
well, first off, the trigger getting stuck is called bolt-stick. there are about 2000 reasons for this, but the one that ususally solves the problem is tightening the feild strip screw really tight (use an allen wrentch). i could never get my ult to work w/ my level 10 untill i tightened that screw.
ult threadYummy yummy yummy, I've got fun in my tummy.
-
Also, don't forget to oil the life out of your on/off assembly, and the rest of the valve for that matter!! And check out http://www.automags.org/forums/showthread.php?t=96538 , Which is BlackVCG's ULT thread!! Hope this helps!!E-Mag's on a diet
Stay tuned for Pics!!!
Centerflag 201 series 68/45Comment
Comment