cocker is now an open bolt

[Wc Keep]

i just put a hinge trigger on my cocker and now the bolt is staying open. anyone ever hear of this.

[vf-xx]

yes. You need to switch the hoses on your 3-way.

Basically, with a slider fram you're pulling back on the 3 way, but with a hinge you're pushing forward.

[maxwell]

hinge ?

You need to swap the 3-way hoses around...the front to rear and rear to front...middle stays the same.
Max

[Wc Keep]

im guessing it has to be retimed also cause its starting to fart like crazy.

[soccer4minimags]

Yep, you will need to make some timing adjustments, probalby lug height, lenght of timing rod, etc. You will just have to switch the hoses, air it up and work from there.

If you don't know how to time check out the site endlesspb.com. There was a good articel with decent pictures on timing.

[Wc Keep]

nevermind i have an awesome cocker tech right up the block from me. does awesome awesome work. plus he told me never to touch it especially after he set up a level 10 faster than i did without instructions.

thanks for your help guys and remember go to aone. checkout the thread in meet and greet.