qloader tubes + warp 90* elbow = DOESNT FIT!!!??

[jwalker87]

I have a warp-right ULE mag that I'm hooking up to a qloader. It's perfect; I got a warp 90* feed elbow so that it comes straight off the side of the body to the qloader. No profile. The problem is: the qloader tube is too small diameter to fit around the warp elbow! I'm almost positive I've seen people use the elbow with a qloader, but how do they do it? THanks.

[silentdeath55]

If it's the plastic adapter from AGD, you need the plastic ring-like piece on the end of the 90* adapter. If it's one of Bad_Dog's adapters, talk to him. I'm sure he can set you up with something

[jwalker87]

yes, its from AGD. What ring-like piece is this? The one on the inside of the qloader elbows? If not then could you give me a bit more info about it? Thanks. Also, I was looking where I thought I had seen this done, but those people put the qloader elbow on the end of the warp elbow, which I can't do. THanks.

[trains are bad]

Get one of bad_dog's warp adaptors, I had one when I ran a Q and it works great. There is a picture of my marker in his dealer's forum thread if that helps.

[ojhspyro89]

Or run electrical tape around the tube and shove it in there itll work great!lol

[jwalker87]

Or run electrical tape around the tube and shove it in there itll work great!lol

^ yeah, i was thinking the same thing!

I think I might have found a way to make due with what I have. If I cut off the portion of the warp elbow that's causing the trouble, I might be able to get one of the small black plastic things (inside qloader sockets and elbows; fits inside the tube) epoxy'd on there. Where can I get one of bad_dog's adapters, and how much is it? Also, would I be able to return this adapter to AGD?

[trains are bad]

bad dog has a thread in the dealer's forum. They are really cheap.

[jwalker87]

cool. I was looking at the Pro-Team ones, but they're $30. Just to let you know what I'm trying to do, here are the two pieces I am trying to connect, and the tube doesn't fit on the grey elbow.

[jwalker87]

I also just checked out bad_dog's thread, and those look awesome! I just send an order for one; at $12 shipped for a metal adapter, you can go wrong. Anybody want a warp adapter?

[personman]

Here is what you're looking for.

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=68&categoryID=19

[jwalker87]

hmm...maybe. I think I'll still order bad_dog's elbow. My entire marker will be black, so this will be nice. Also it is lower profile, which will help. I think I'll actually get 2; one for the socket and one for the feed tube. It will be much more precise-looking, which is what I'm going for. I don't like the tube going all over the place.

[Bad_Dog]

$12 shipped?

Last I remember they were $10 shipped

and either way, yours will be a little cheaper

he's the luckey #25!

[jwalker87]

ooh....yea! Thanks bad_dog. I'll get some pics up of them as soon as I get them. the 45* will either go on my vert. feed micromag or aid in the setup on this one. woohoo!