xvalve not working

[djmrk]

Hello,
I have tac-1 with xvavlve, my problem, marker will not recock, can only shoot 1-2bps..any faster, marker will not recock. I have taken it to local shop and they have tried using the shimms with no success. I have tried three different shops, still cannot get it to work. What can I do now? please help. I have tried a dye throttle preset at 850, adjustable from 700-900, and PE preset at 825.

[�?�� �m���]

recock like the trigger rod????? oil the monster the on off especially

[djmrk]

Tried that, still not working

[i_baked_cookies]

did you make sure it wasnt bolt stick? tighten field strip screw, oil down the powertube, or going up a carrier size?

[djmrk]

I oiled the bolt, using the fouth carrier up, next one up leaks. The person at my local pro shop states that he is a cert agd tech, but is unable to make it work and the place I purchased from refuses to an exchange. This sucks, big time. Sure glad I have my trusty back up ( VSC Phantom ).

[Chicago Pb 7]

Its new right? I had the same problem with my ule custom, you need to break in the valve, keep oiling everything the on/off assembly ect. You will need to put about 2-3 tanks of air threw it before it is completely broken in, try this setup, 2.0 carrier 1 shim smallest spring.

[djmrk]

Tried that, got worse, went back to how it was. Well I am pretty upset right now. Here I thought this was going to be a great product, so far, I am not impressed. If a AGD tech cannot fix it, then who can.

[Eatem Alive]

how much air is in your tank?

[djmrk]

2500 #

[Venom523]

Sounds like you need to add a lvl 10 shim or 2. Think I had to put 3 in before my Xvalve quit sticking. Also try a different barrel. Every now and then I find a barrel/bolt combination that wont work together but thats on the old style body and barrel set-up. Try dropping the lvl 10 front bolt into the body by itself to see if it moves freely in there. With and without a barrel on. All else fails get in touch with Tunaman here on the forum. He should be able to help. Good luck.

[Chicago Pb 7]

Yes I know, I was very mad myself but trust me just keep oiling it and shooting it, it will prevail sooner or later.

[Eatem Alive]

like the other guy said, oil the crap out of it, it won't hurt nothing. take out the on/off, put a couple of drops in there, put 4-5 drops in the asa. also, have you been able to chrono it? you might just have the velocity to low, try turning it up a little at a time

[djmrk]

Yes, I have corono @ 285, Can only shoot 2 balls...then I have to push the bolt back with my finger. I have used 1-5 shims. still will not recock. I have oiled the hell out of it. Thing is, the cert agd tech could not get it to work either. Maybe I can send my marker to Tunaman?

[AnArchist_1944]

Tunaman is God.....well the AGD god at least

[Eatem Alive]

try the smallest spring for the level 10