I got a used eclipse splash kit a little while ago and i played one game with it. a few days later i screwed in my tank and it was leaking. i looked over the owners manual and video and nothing was simlar to my problem. so i took it to my local feild and had it fixed. i went to pick it up and he said my body rail was worn out and i needed a new one. he put a body rail from one of the other mags on it and it worked. is it true that the body rail wears out?
-
E-Mail: [email protected] -
the body rail should not wear out. the only thing that may wear is the groove where the sear sits in. but i have never heard of it happening.
if your eclipse body rail "wore out" call them and see if you had a defective rail.
-
The only thing that could possibly wear, is the Zgroove where the A.I.R. valve locks in. Nothing else has a friction point or wear area. He lied to you to sell you another rail.
Comment
-
i haven't bought one
he didnt have one there what do i do now i would like a matching rail. help meE-Mail: [email protected]Comment
-
what is planet eclipse's number or e-mail
i've been to there site and i couldnt find anythingE-Mail: [email protected]Comment
-
Did you loose your automag rail bushing
There should be a bushing in the hole where the feildstrip screw goes through in the rail. If you lost this bushing that would be your problem.Did you hear about the new european weapons contracts? France is going to make the wooden sticks Spain making the little white flags
Comment
-
-
rail wear
The problem with rail wear is the grove where the sear pin sits, if it wears just a little it will mess up the travel for you on off pin, another thang that good be wrong is your rail might be a little bent.automag rulesComment
-
Eclipse Rail
I have new eclipse rails if you need one...Silver onlyComment
-
i had it fixed a while ago
my gun needed oil and a new rail the place were the sear sat was what screwed t up. somehow i managed to fid a brand new rail the exact same color as mine...LuckE-Mail: [email protected]Comment
Comment