Some One Pleas Help Me W/ My Mag

[oneworld]

oook...i have had this problem some time now!

ill put my hpa tank on and it will air up and all (it will click) and you have the normal amount of trigger pull....but it wont shoot ne thing!!!
i really really need someones help if they no whats wrong

and its not the velocity!

it is a rtp ule custom w/ xvlave lvl 10 and ult and a benchmark trigger frame

[guysdaman]

well if your running a lvl 10 bolt it could be bolt stick. If so try using a larger carrier and lubing it up.

[oneworld]

ill try that..but i dont have ne spare parts right now

[Dayspring]

What kind of valve? What gun make/model? Gripframe? Aftermarket parts?

[oneworld]

automagt rt ule custom

onley thing i added was a bench marc trigger frame,,,and some new macro

it has x valve lv10 and ult kit!

[toymyster]

2 things with benchmark grip: Make sure your top grip panel screw does not interfere with the sear ( sounds stupid, but it did happen to me once), and your trigger rod has the proper clearance with the trigger itself, on some benchies, you have to adjust for clearance, and the OE spec. might be too short!!!!

[oneworld]

hmm

ill throw my stock trigger frame on and see if it works then

[squish27]

I had a similar problem with my e-mag. Try screwing the tank in all the way and then unscrew it about 1/4 turn. On my mag the tank seals itself off of it is screwed in to tight.

Hope this works.

[cphilip]

Regulator Pin assembly is sticking.... oil it.