ULT / Level X question

[Kyser]

Well ive got a ULE RT Pro custom and ive been trying to get it to run right before my first game with it. First it was having bad bolt stick every 15 shots, used the level x tuning guide and lubed it well and everything seems to be running ok now(still gotta crono it and see where I am but thats life). Then I decided to mess with the ULT a bit to get some reactivity out of it. Im using a crossfire tank and added 2 shims making the total 4 shims. I get some reactivity but not runnaway which is what I want(allows me to do 3 round bursts nice and easy). My current problem is when I added the shims it now makes a weird squeaking noise every few shots? I placed like 5 drops of oil in the bottom line and fired around 30 shots through it, doesnt seem to have helped. What am I missing?

Thanks

[Chronobreak]

give it some time. also remove the pin and oil isndie it if u can. ive noticed a similar sound with some ult'd mags

[Kyser]

Will do, now its just a matter of getting some air and playing with stuff some more before heading out pbing tonight..............finally I get to use my mag in a game instead of just fireing it around the house and scaring my dog!

[BlackVCG]

Just put a lot of paint through that gun and it will keep getting better. As the sear smooths out and the o-rings loosen up and get smoother, you'll notice the difference.

[Sticknes]

Hope tis applys.. Doyou have to get that ult trigger to get reactivity? or is it possible with out it, just more of a challenge?

[Chronobreak]

the stock on/off is the most reactive.

ult KILLs reactivity for an easier to fan trigger and lgihter pull some reactivity can be had with the ult stil but not as mcuh as stock