x mag problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gilgamesh
    Registered User
    • Aug 2004
    • 48

    #1

    x mag problem

    i cant get the gun to shoot, every time i pull the trigger the bolt comes half way forward then resets.
  • eNder159
    buy a mag ...the END
    • Mar 2004
    • 523

    #2
    make sure ur detents arent screwed in too much..cuz if they are they can get in the way of the lvl 10 bolt


    Oh you got an anti chop bolt? Put your toungue in there and prove it to me.


    feeeeeeeeeeeeeeeddback

    Comment

    • Gilgamesh
      Registered User
      • Aug 2004
      • 48

      #3
      ok now when i shoot the bolt stays forward leaking out air until i degas the gun

      Comment

      • Gilgamesh
        Registered User
        • Aug 2004
        • 48

        #4
        ok now its doing the first thing again, its not the detents, i took it out completely and it still does it

        Comment

        • deadeye9
          The other deadeye.
          • Jan 2003
          • 323

          #5
          Remove the breech and see if that helps. If it does then the bolt is hitting something.

          Remove one or more shims.

          Comment

          • Gilgamesh
            Registered User
            • Aug 2004
            • 48

            #6
            it still does it without the breech

            Comment

            • eNder159
              buy a mag ...the END
              • Mar 2004
              • 523

              #7
              put one or two drops into the macroline elbows and then lube the powertube and then lube your on / off ...


              Oh you got an anti chop bolt? Put your toungue in there and prove it to me.


              feeeeeeeeeeeeeeeddback

              Comment

              • Gilgamesh
                Registered User
                • Aug 2004
                • 48

                #8
                problem solved, turns out my centerflag nitro tank is LP

                Comment

                Working...