hey i hooked up my emag lowers and everytihng and it doesnt shoot. i mean it shoots once but then no more. would this be from the on.off assy or the lvl10? i have the no ring carier and no shims in it right now thanks
-
Ender's Violent/Hybrid Alias: 14" Stiffi, Frenzy116, Critical Trigger, VPp Torp HPR, Hybrid LPR w/ VPp, hybrid ARC
STOP PLAYING WITH MY SIG ITS NOT TOO BIG
:ninja: -
what kind of valve?Euro E-mag | TL63 | XMOD| EM01610
Euro Rt | OG | RT02382. -
Emag valve has two special things to it. It has a shorter on/off pin as well as a "quad" o-ring. also have you turned up the velocity? and what valve?AGD - We haven't chopped a ball in years, but nobody believes us...
EMAIL: [email protected]
AIM: Sharpcelica
AO FeedbackComment
-
my bad, using the xvlave with the stock onoff i think its an rtpro on.off...someone suggested filing down the pin in the onoff assy but i didnt want to do that unless i really really have to, forsome reason the damn thing hest stuck forward..Ender's Violent/Hybrid Alias: 14" Stiffi, Frenzy116, Critical Trigger, VPp Torp HPR, Hybrid LPR w/ VPp, hybrid ARC
STOP PLAYING WITH MY SIG ITS NOT TOO BIG
:ninja:Comment
-
Check this thread for the on/off pin lenths: http://www.automags.org/forums/showthread.php?t=67604
also look into getting one of those quad o-rings. tunaman can you hook you up for cheap.AGD - We haven't chopped a ball in years, but nobody believes us...
EMAIL: [email protected]
AIM: Sharpcelica
AO FeedbackComment
-
i might just end up sending the whole thing to him if i cant get it fixed tonightEnder's Violent/Hybrid Alias: 14" Stiffi, Frenzy116, Critical Trigger, VPp Torp HPR, Hybrid LPR w/ VPp, hybrid ARC
STOP PLAYING WITH MY SIG ITS NOT TOO BIG
:ninja:Comment
-
What kind of rail are you using?
Cuz unless you can magically make a .712" pin, you may need to order one.
Originally posted by evo.end3RComment
-
im using a rtpro rail...Ender's Violent/Hybrid Alias: 14" Stiffi, Frenzy116, Critical Trigger, VPp Torp HPR, Hybrid LPR w/ VPp, hybrid ARC
STOP PLAYING WITH MY SIG ITS NOT TOO BIG
:ninja:Comment
-
Originally posted by Dayspring
any other opinions?Ender's Violent/Hybrid Alias: 14" Stiffi, Frenzy116, Critical Trigger, VPp Torp HPR, Hybrid LPR w/ VPp, hybrid ARC
STOP PLAYING WITH MY SIG ITS NOT TOO BIG
:ninja:Comment
-
here's my very, very uneducated opinion. Just add shims, if you used all of 'em, upgrade to a larger (smaller carrier), also, try changing springs in the lvl10.Comment
-
You need a .712" pin and a quad o-ring. The reason AGD used the quad o-ring in the E-Mag is because of the exact problem you are having.Comment
Comment