Having a serious problem.

[punkmonkey]

My mag refuses to fire, or even recock. It will only fire once or twice after I gas it up, and after that it doesn't want to work. Can someone please help me??

[kilaueakid]

Some things to check...
air pressure in tank?
Is the bolt sticking forward?
When you first gas it up, is there enough room between the back of the trigger and sear rod to get a piece of paper in between?
What kind of trigger frame is on the gun?
Is air leaking out from anywear?
Is the velocity nut in far enough?
When was the last time it was cleaned and oiled?

let us know some more variables.
kila

[punkmonkey]

The tank pressure was fine, and there is more than enough room to fit a piece of paper. I have a benchmark 1x frame, but it was doing the same thing when i had my stock frame. I loosened my velocity adjuster and i refused to cock, and when i tightened it i started to leak and almost backfire. Also, I cleaned and oiled my gun before I tested it.

[kilaueakid]

what do you mean by backfire? Like air coming out the back? Your trigger rod may be adjusted to far in. Have you ever adjusted it? Did you by the gun used? If so maybe someone else adjusted it. If someone else melted the lock-tite off, it is possible that after using it awhile the rod screwed it's self in further.

[Army]

Sounds like the spring pack got crushed. Remove the velocity adjust bolt and check the springs condition/