ULE/Hopper Question

[Earthy]

I recently purchased a mag with a ULE body, and I'm wondering what is the best way to secure my revy to the feedneck. The revy fits okay into the feedneck but I'm concerned that it doesn't clamp on. This is also my first marker that has a CF.

Thanks,
Earthy the Mag Newbie

[felony]

I recently purchased a mag with a ULE body, and I'm wondering what is the best way to secure my revy to the feedneck. The revy fits okay into the feedneck but I'm concerned that it doesn't clamp on. This is also my first marker that has a CF.

Thanks,
Earthy the Mag Newbie

Hey, check with roguefactor in the dealerforums. He is a dealer here and makes nice clamping feednecks for ULE mags.

[Earthy]

Thanks.

[MonsterMag]

follow the linkage

Plese Click Here

[brianlojeck]

1 or 2 layers of electrical tape around the feedneck will be cheap insurance in the meantime.

[AssassinByNight]

You could just use a metal pipe clamp until you find a replacement, it wouldn't need to be replaced as much as electrical tape if you ever wanted to take the hopper off.

[Earthy]

Thanks for the advice... Looks like tape until after X-Mas

[krafty]

Sometimes even one small square of masking tape on the hopper neck is enough to make a tight fit. Dont' over-tape. Try a little bit and if it still doesn't fit securely, go to a larger piece.