Problems w/ ULE Body

[AGD202]

when you take the rail off the emag how to u take the twist lock out of it so the ULE body will set on the rail right..... its the new style

[Tunaman]

press it out with a press or vise and a socket...

[Bad_Dog]

whack it with something hard from underneath... or boil it in acid so that..... ok maby no acid but wacking it hard works

[danheneise]

...wacking it hard works

[Rift]

LOL yeah just make sure that your doing it on something you dont mind denting if your gonna wack it out of place.

[MonsterMag]

this is a common qestion , as i said brgore put in a bench vise . it works the best

wrap it with a towel or rag first

hope this helps

[Gambit1106]

I just drilled a hole in my work bench, and tapped the assembly out with a hammer and punch into the hole. That way I still have a stable base when I tapped it out.

[AGD202]

thnx for the help

alright thnx for the help guys.... and i gotta say... the whacking it hard doesnt work on mine.. when i was at a field me and some1 else took a hammer to it and hit it pretty damn hard it it wouldnt come out lol... so ill go try a vice

[AGD202]

HEY! i got it out!!

BUT one thing.... u had better tell ppl to use a piece of ply wood lol cuz 2 teeth of my vice caught my rail when i was using a towl so i cut out a small piece of ply wood and it worked perfect!

thnx a lot for the help tho

[AGD202]

now my body wont go on snug till i grind down those 2 spots lol... and i dont have a dremel... any adivce? i dont think a file will work too well...

[AGDlover]

do you have a ULE warp body???

[AGD202]

no its vert feed.... but warp comes w/ a piece that you can use to put it on vert feed bodies... i dont use my warp anymore since i got a halo tho