micromag rt valve problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • CprodigyX
    Registered User
    • Sep 2004
    • 34
    #1

    micromag rt valve problem

    Hi guys this is my first post. Well the problem is when i gassed up my RT valve today air began to leak out of the hole on the left side. I opened it up and checked all the o-rings and everythhing looked to be in working condition. Is there somehing I'm missing? I could sure use and ideas or comments.

    Thankx
    Tags: None
    • SpecialBlend2786
      Registered User
      • Jun 2003
      • 4023
      #2
      Welcome to AO!

      is it an old school RT valve? hole on the left side? elaborate?

      I dont remember there being a hole on the left side lol. Could be wrong though

        Comment

        • VFX_Fenix
          -=Bishop=-
          • Sep 2004
          • 1052
          #3
          Replace the O-ring on the Reg. Piston Part #113 that should stop that leak.

            Comment

            • jctam
              Registered User
              • Jan 2003
              • 55
              #4
              I have the same problem, I ordered a whole new reg piston assembly for like 20 bucks from AGD and mine still leaks.

                Comment

                • athomas
                  Of course it works-its AGD
                  • Jan 2002
                  • 8039
                  #5
                  Just clean out the valve back and replace the o-ring that goes around the regulator piston assembly.
                  Except for the Automag in front, its usually the man behind the equipment that counts.

                    Comment

                    Previous template Next
                    Working...