Multiple Minimag Questions

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • clockworkmiller
    Time Changes Everything
    • Dec 2001
    • 265
    #1

    Multiple Minimag Questions

    Well, here they are:

    Minimag internals are the same as in the 68 'mag, right?

    Would it be bad to attach a regulator to the vertical mount on the minimag? Since that is a 3rd regulator (main, in line, and the one on the HPA system) Ive heard there could be problems.

    Has anybody heard anything concerning the Minimag being discontinued?
    WDP: "Our gun is $400 shinier than yours." - Miscue

    "Evil Tom Grinns......" - Tom
    Tags: None
    • Minimag4me
      Registered User
      • Jul 2001
      • 779
      #2
      the internals are exactly the same

      I have triple regged my mini with no shootdown problems with my hyperframe. It all depends on the flow rate of the reg.

      Minimags were going to be discontinued but i think due to popular demand they arent going to be.
      -Minimag Body HR
      -Retro Valve
      -Z grip with extender
      -12V X-Boarded Revvy
      -6 barrels including:10 Inch DYE SS, 8 inch Steel Wind, 8 inch stock minimag barrel, 12 inch BOA barrel, 12 inch Lapco Autospirit, 16 inch SPAA
      -68/3000 Flatline

        Comment

        • Army
          Moderator of DOOOOOOOOMMM!

          • Oct 2000
          • 5785
          #3
          Minimags are NOT discontinued. (check the Store)

          Too much regulation can cause flow problems. Each regulator is a delay in flow rate as it must open when the pressure goes down, and close when it goes up. Too many of these delays will cause shootdown. Stay with two regs maximum

            Comment

            Previous template Next
            Working...